AC 1010~5010 Series Air Filter Regulator (FR.L Combination )

 Pneumatic transmission system, air source treatment unit is refers to the air filter, relief pressure valve and oil mist eliminator, some brands of electromagnetic valve and the cylinder can be achieved without lubricating oil (grease lubricating function realized by), need not use oil sprayer! Filter degree is 50-75 μ m, voltage range of 0.5-10Mpa, such as the need of filtering precision is 5-10 μ m, 10-20 μ m, 25-40 μ m, and the voltage is 0.05-0.3Mpa, component 0.05-1Mpa three big no pipe connection and called triple pieces. The big three are the majority of pneumatic source device system is an indispensable, installed in the gas equipment nearby, is finally compressed air quality guarantee. The installation sequence of the big three according to the air inlet direction respectively, air filter, relief pressure valve and oil mist. Air filter and pressure relief valve are combined together can be called the two pneumatic component. Can also be air filter and pressure relief valve assembly together, will become the filtration pressure reducing valve (function and air filter and pressure relief valve used in combination.). In some cases cannot allow compression in the oil mist in the air, you need to use the oil mist separator will be compressed air oil mist filter. In short, these elements can be selected according to need, and they can be combined for use.

Air filter for air cleaning, filtering the compressed air in the water, avoid water enters the device with gas. The valve can be regulated for air, the air in the steady state, can be reduced because of gas pressure mutation when the valve or actuator hardware damage. Filter for air cleaning, filtering the compressed air in the water, to prevent water from entering the device with gas. Oil mist lubrication of the moving parts of lubrication, can be inconvenient for lubricating parts, greatly extending the life of the body.

Filter regulator Product Description

These A series FRL pneumatic component are similar as SMC models, which can be replace with SMC type, very good quality pneumatic component.

FRL is one type of pneumatic component, which is used for cleaning the medium, are including filter, regulator, lubricator, we have three unit together and also two unit together.

Air Filter, A filter for removing dust and other particles from a stream of air, typically used in the air intake of an internal combustion engine, the output of an air compressor, the supply duct of a forced-air furnace, etc

Shipment:

1. All items will be shipped out within the processing time after receive your payment. If the payment is not available, your order will be closed automatically.

2. DHL/UPS/Fedex Express usually takes about 3-5 working days to the destination. And it's about 5-8 work days by EMS or TNT. Hongkong Post Air Mail and Hongkong Post Air Parcel takes 7 to 30 days to ship to worldwide.

3. The buyer are responsible for any insurance ,problems and damage which caused by shipping service such accidents, delays or other issues. Besides the buyer should to be responsible for any tax and/or duty charged by their country.

Warranty and Guarantee:

‍

1. All the goods are inspected before shipment, so if you are not satisfied with the purchase, you can exchange the items in one week and you must contact us within 24 hours of the receipt of your purchase

2. The shipping and handling charge is not refundable and customer should be responsible for all the charges of returning and reshipping.

3. All return items must be in its original conditions, including box and accessories. Men made defects are not guaranteed, such as broken, scratched and so on.

4. For any items,please send by EMS or your local post when send back.

Other Policies:

1. We are not responsible for any custom duty or import tax.

2. Please leave POSITIVE FEEDBACK after receiving the goods if you are satisfied with our products and service. And we will do the same. Please contact us if you are not satisfied with the item after receive it, we will try our best efforts to support you.

3. All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will try to reply to you as soon as possible.

4. Serious Buyer Only! Please place bid only if you agree with all the terms.

Attention:

1.      We have special departments to ensure that no strict quality control any quality problem before delivery.

2.      2.Carefully check goods size table and product specifications. Please check detail with customer service before buying .

3.      3. Receiving or take the goods, please sign the bill after the first inspection, if have damaged items, or a few goods phenomenon, please do not sign, the first contact with the customer details and make logistics company personnel or personnel in proof of delivery after processing, or receipt of any problems after the Seller shall not be held responsible.

The information about our company:

NINGBO SMART PNEUMATIC CO LTD is specialized in manufacturing all kinds of hydro pneumatic components, aluminum parts and plastic parts. Our main products are including pneumatic cylinder, (air cylinder), solenoid valve, air filter, air regulator, air lubricator,pneumatic fitting, hydraulic fitting, tubes, muffler (silencer) etc

NINGBO SMART PNEUMATICS' sprit:

we will give you the best quality, the competitive price, the quick delivery, the perfect service. Our goal to customers is "Always Smart Solution for your Automatic System."

NINGBO SMART PNEUMATIC hopes to work together with you, developing in parallel!